WAND-Online Service
The WAND-Online subscription service provides remote, cost-effective, real-time wall-thickness monitoring reducing the need for personnel on-site
WAND-Online enables thickness measurements from installed WAND TM Sensors to be automatically directed to the cloud-based Inductosense Data Analysis & Reporting Toolkit (iDART) software. The sensors are installed on the surface of pipework or vessels. The low profile design allows them to be embedded underneath coatings, insulation or composite repair.
The WAND Remote Data Collectors (RDCs) acquire the measurements from the sensors at pre-defined intervals. The data is then sent via Bluetooth 5.0 to a Gateway which in turn transmits the data via 4G to the iDART software.
WAND-Online is simple to set up and provides accurate, trendable wall-thickness data. It operates via 4G network without the need for an on-site wireless network, making it ideal for remote sites with minimal infrastructure.
Technical Specifications
Gateway Specification
X2000
Dimensions
186mm (W) x 159mm (L) x 254mm (H)
7.3inches (W) x 6.3inches (L) x 10inches (H)
Weight
1450g
Connectivity
BLE 5.0 long range (CODED PHY)
Frequency
2.400-2.483 GHz
Bluetooth Range
200m/656ft (line of sight); 100m/328ft (typical industrial environment)
Cellular Modem
Quectel EG25-G
Cellular Network Technology
4G LTE Cat 4
Mounting
Wall or pole mounting kit inc.
IP Rating
IP66
Operating Temperature
Min: -20°C / Max: 60°C
Min: -4°F / Max: 140°F
Storage Temperature
Min: -35°C / Max: 70°C
Min: -31°F / Max: 158°F
Humidity
0% to 90% non-condensing
Power Supply
12V DC power adapter*
* The DC connector must have a centre-positive configuration, with an inner diameter of 2.5 mm and an outer diameter of 5.5 mm. The output power should be 24W or greater.
